Cut Edge Corrosion

If cut edge corrosion is not addressed quickly it will eat into the metal sheet causing the sheet laps to fail and create roof leaks into the building.

Our Most Popular Services

Sheeting and cladding

A fast and cost effective roofing solution

Guttering and maintenance

Make sure the rain goes with the flow

Roof light replacement

Boost your business with some vitamin D

Roof surveys and reports

We provide a list of defects and recommendations

What is Cut Edge Corrosion?

It is when corrosion develops, predominantly on roofs. It happens where the coating de-laminates and peels back from the sheet edge. This is primarily due to weathering, the exposed metal surface will corrode and eventually perforate if left untreated. At this stage, replacement of the roof sheets will be the only suitable method of repair.

VBS Ltd are an approved contractor of Seamsil and are able to carry the repairs out to the highest of standards. VBS Ltd are Industry leaders in the refurbishment and protection of industrial and commercial roofing and cladding.We use the most effective UV and corrosion resistant coatings available for the refurbishment of all roofing and cladding.

Where is treatment needed?

As industrial and commercial roofing contractors, we often find that metal cladding sheets are susceptible to corrosion and weathering, especially at the point where the metal sheet ends or overlaps with another sheet.

If cut edge corrosion is not addressed quickly it will eat into the metal sheet causing the sheet laps to fail and creating roof leaks into the building.

This could dramatically affect the value of the building and considerably increase maintenance costs. As a rule, we would always recommend regularly coating your metal cladding in addition to frequent roof maintenance as an effective rust prevention method.

After cut edge corrosion has been identified, the area must be first cleaned and prepared for treatment. Depending on the severity of the corrosion, loose paint, rust and corroded areas are often removed manually, to which we would then add a three part cut edge system to the affected areas. We always ensure that all cut edge corrosion treatments are undertaken with little disruption to your property, business and the general public.

  • Able to reinforcement heavily deteriorated laps
  • Able to prolong early roof sheet replacement
  • Aesthetically pleasing

Benefits of this service

Choosing to treat cut edge corrosion offers numerous benefits to help enhance your commercial or industrial property.

  • Your building can stay open as the walls are still in position

  • Saves hefty long-term costs
  • Lengthens the life of your building
  • UV and corrosion resistant
  • Easy installation
  • Year round application 

Call For a Quote:

01706 222 292

Related Services

Preventative Maintenance

Addressing a problem before deterioration of the element is almost always cheaper than rebuilding or patching it.

Roof Survey

Our trained and experienced surveyors will attend your site/premises at a date and time to suit your schedule.

Composite Panels

Composite panels can be used for roofs and walls. This is a modern industrial system that is very popular in refurbishments.

Let's Build Something Together

We would love to hear from you. Get in touch today to find out what we can do to help you with your needs. 

Why should I choose VBS?

We have over 30 years experience and quality delivery as paramount and essential to any works undertaken, have a look at our latests projects to see the quality of work that we produce.

My roof is leaking what should I do?

Call us immediately on 01706 222 292 and we will advise the best solution depending on how serious the leak is.

Do you supply scaffolding?

Absolutely we do, anything we can do to make the process easier for you is high on our list of things to do.

Do you charge for quotes?

Our quotes and estimates are free of charge, we will get to the root of the problem quickly and give you a price to repair.

Do I have to be in when you come to look at the work?

Not necessarily. If we can gain access to what we need to see, then no, you do not need to be at the building when we come to inspect the required work. But it's always best if you are there.

Contact Us

14 + 12 =

VBS Limited Carrs Industrial Estate, Rossendale, Lancashire, BB4 5JT

01706 222 292

enquiries@vbsltd.co.uk